Hupfer
-
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT GN 1/6 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: acrylic glass door, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum sheet.
Please specify the color of the side walls when ordering.
€ 861,00MOQ
1Itemnr.
72.3702Brand
HupferLength in mm
460 mmWidth in mm
690 mmHeight in mm
1450 mmType
1/6GNInterval in mm
175 mmMaterial
PlasticColour
Multi -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT GN 1/7 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: acrylic glass door, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum sheet.
Please specify the color of the side walls when ordering.
€ 873,00MOQ
1Itemnr.
72.3703Brand
HupferLength in mm
460 mmWidth in mm
690 mmHeight in mm
1450 mmMaterial
PlasticColour
MultiType
1/7 GNInterval in mm
150 mm -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT GN 1/9 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: acrylic glass door, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum sheet.
Please specify the color of the side walls when ordering.
€ 894,00MOQ
1Itemnr.
72.3704Brand
HupferLength in mm
460 mmWidth in mm
690 mmHeight in mm
1450 mmMaterial
PlasticColour
MultiType
1/9 GNInterval in mm
125 mm -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT GN 1/11 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: acrylic glass door, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum sheet.
Please specify the color of the side walls when ordering.
€ 918,00MOQ
1Itemnr.
72.3705Brand
HupferLength in mm
460 mmWidth in mm
690 mmHeight in mm
1450 mmMaterial
PlasticColour
MultiType
1/11 GNInterval in mm
100 mm -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT GN 1/15 HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 974,00MOQ
1Itemnr.
72.3706Brand
HupferLength in mm
460 mmWidth in mm
690 mmHeight in mm
1450 mmMaterial
PlasticColour
MultiType
1/15 GNInterval in mm
75 mm -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT GN 1/7 HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 897,00MOQ
1Itemnr.
72.3707Brand
HupferLength in mm
460 mmWidth in mm
690 mmInterval in mm
175 mmMaterial
PlasticColour
MultiType
1/7 GNHeight in mm
1650 mm -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT GN 1/9 HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 919,00MOQ
1Itemnr.
72.3708Brand
HupferLength in mm
460 mmWidth in mm
690 mmMaterial
PlasticColour
MultiInterval in mm
150 mmType
1/9 GNHeight in mm
1650 mm -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT GN 1/10 HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 927,00MOQ
1Itemnr.
72.3709Brand
HupferLength in mm
460 mmWidth in mm
690 mmMaterial
PlasticColour
MultiInterval in mm
125 mmHeight in mm
1650 mmType
1/10 GN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT GN 1/13 HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 961,00MOQ
1Itemnr.
72.3710Brand
HupferLength in mm
460 mmWidth in mm
690 mmMaterial
PlasticColour
MultiInterval in mm
100 mmHeight in mm
1650 mmType
1/13 GN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT GN 1/18 HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 1.034,00MOQ
1Itemnr.
72.3711Brand
HupferLength in mm
460 mmWidth in mm
690 mmMaterial
PlasticColour
MultiInterval in mm
75 mmHeight in mm
1650 mmType
1/18 GN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT EURONORM 1/6 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 863,00MOQ
1Itemnr.
72.3712Brand
HupferWidth in mm
690 mmHeight in mm
1450 mmInterval in mm
175 mmMaterial
PlasticColour
MultiLength in mm
505 mmType
1/6 EN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT EURONORM 1/7 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 875,00MOQ
1Itemnr.
72.3713Brand
HupferWidth in mm
690 mmHeight in mm
1450 mmMaterial
PlasticColour
MultiInterval in mm
150 mmLength in mm
505 mmType
1/7 EN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT EURONORM 1/9 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 949,00MOQ
1Itemnr.
72.3714Brand
HupferWidth in mm
690 mmHeight in mm
1450 mmMaterial
PlasticColour
MultiInterval in mm
125 mmLength in mm
505 mmType
1/9 EN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT EURONORM 1/11 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 920,00MOQ
1Itemnr.
72.3715Brand
HupferWidth in mm
690 mmHeight in mm
1450 mmMaterial
PlasticColour
MultiInterval in mm
100 mmLength in mm
505 mmType
1/11 EN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT EURONORM 1/15 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 976,00MOQ
1Itemnr.
72.3716Brand
HupferWidth in mm
690 mmHeight in mm
1450 mmMaterial
PlasticColour
MultiInterval in mm
75 mmLength in mm
505 mmType
1/15 EN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT EURONORM 1/7 H. 165CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 899,00MOQ
1Itemnr.
72.3717Brand
HupferWidth in mm
690 mmInterval in mm
175 mmMaterial
PlasticColour
MultiHeight in mm
1650 mmLength in mm
505 mmType
1/7 EN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT EURONORM 1/9 H. 165CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 921,00MOQ
1Itemnr.
72.3718Brand
HupferWidth in mm
690 mmMaterial
PlasticColour
MultiInterval in mm
150 mmHeight in mm
1650 mmLength in mm
505 mmType
1/9 EN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT EURONORM 1/10 H. 165CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 929,00MOQ
1Itemnr.
72.3719Brand
HupferWidth in mm
690 mmMaterial
PlasticColour
MultiInterval in mm
125 mmHeight in mm
1650 mmLength in mm
505 mmType
1/10 EN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT EURONORM 1/13 H. 165CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 963,00MOQ
1Itemnr.
72.3720Brand
HupferWidth in mm
690 mmMaterial
PlasticColour
MultiInterval in mm
100 mmHeight in mm
1650 mmLength in mm
505 mmType
1/13 EN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT EURONORM 1/18 H. 165CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 1.036,00MOQ
1Itemnr.
72.3721Brand
HupferWidth in mm
690 mmMaterial
PlasticColour
MultiInterval in mm
75 mmHeight in mm
1650 mmLength in mm
505 mmType
1/18 EN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT UNI 1/12 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 910,00MOQ
1Itemnr.
72.3722Brand
HupferHeight in mm
1450 mmInterval in mm
175 mmMaterial
PlasticColour
MultiLength in mm
595 mmWidth in mm
855 mmType
1/12 UNI -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT UNI 1/14 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 923,00MOQ
1Itemnr.
72.3723Brand
HupferHeight in mm
1450 mmMaterial
PlasticColour
MultiInterval in mm
150 mmLength in mm
595 mmWidth in mm
855 mmType
1/14 UNI -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT UNI 1/18 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 949,00MOQ
1Itemnr.
72.3724Brand
HupferHeight in mm
1450 mmMaterial
PlasticColour
MultiInterval in mm
125 mmLength in mm
595 mmWidth in mm
855 mmType
1/18 UNI -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT UNI 1/22 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 977,00MOQ
1Itemnr.
72.3725Brand
HupferHeight in mm
1450 mmMaterial
PlasticColour
MultiInterval in mm
100 mmLength in mm
595 mmWidth in mm
855 mmType
1/22 UNI -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT UNI 1/30 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.€ 1.043,00MOQ
1Itemnr.
72.3726Brand
HupferHeight in mm
1450 mmMaterial
PlasticColour
MultiInterval in mm
75 mmLength in mm
595 mmWidth in mm
855 mmType
1/30 UNI -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT UNI 1/14 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 952,00MOQ
1Itemnr.
72.3727Brand
HupferInterval in mm
175 mmMaterial
PlasticColour
MultiHeight in mm
1650 mmLength in mm
595 mmWidth in mm
855 mmType
1/14 UNI -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT UNI 1/18 H. 165CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 1.145,00MOQ
1Itemnr.
72.3728Brand
HupferMaterial
PlasticColour
MultiInterval in mm
150 mmHeight in mm
1650 mmLength in mm
595 mmWidth in mm
855 mmType
1/18 UNI -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT UNI 1/20 H. 165CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 989,00MOQ
1Itemnr.
72.3729Brand
HupferMaterial
PlasticColour
MultiInterval in mm
125 mmHeight in mm
1650 mmLength in mm
595 mmWidth in mm
855 mmType
1/20 UNI -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT UNI 1/26 H. 165CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 1.028,00MOQ
1Itemnr.
72.3730Brand
HupferMaterial
PlasticColour
MultiInterval in mm
100 mmHeight in mm
1650 mmLength in mm
595 mmWidth in mm
855 mmType
1/26 UNI -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT UNI 1/36 H. 165CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only the side walls are covered. The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 1.112,00MOQ
1Itemnr.
72.3731Brand
HupferMaterial
PlasticColour
MultiInterval in mm
75 mmHeight in mm
1650 mmLength in mm
595 mmWidth in mm
855 mmType
1/36 UNI -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT 2X GN 1/1 GN 1/12 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 900,00MOQ
1Itemnr.
72.3732Brand
HupferHeight in mm
1450 mmInterval in mm
175 mmMaterial
PlasticColour
MultiLength in mm
665 mmWidth in mm
815 mmType
1/12 GN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT 2X GN 1/1 GN 1/14 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 913,00MOQ
1Itemnr.
72.3733Brand
HupferHeight in mm
1450 mmMaterial
PlasticColour
MultiInterval in mm
150 mmLength in mm
665 mmWidth in mm
815 mmType
1/14 GN -
TRAY/CLEARING TRAY 1-COMPARTMENT 2X GN 1/1 GN 1/18 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 937,00MOQ
1Itemnr.
72.3734Brand
HupferHeight in mm
1450 mmMaterial
PlasticColour
MultiInterval in mm
125 mmType
1/18 GNLength in mm
665 mmWidth in mm
815 mm -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT 2X GN 1/1 GN 1/22 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 962,00MOQ
1Itemnr.
72.3735Brand
HupferHeight in mm
1450 mmMaterial
PlasticColour
MultiInterval in mm
100 mmLength in mm
665 mmWidth in mm
815 mmType
1/22 GN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT 2X GN 1/1 GN 1/30 H. 145CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 1.023,00MOQ
1Itemnr.
72.3736Brand
HupferHeight in mm
1450 mmMaterial
PlasticColour
MultiInterval in mm
75 mmLength in mm
665 mmWidth in mm
815 mmType
1/30 GN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT 2X GN 1/1 GN 1/14 H. 165CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 941,00MOQ
1Itemnr.
72.3737Brand
HupferInterval in mm
175 mmMaterial
PlasticColour
MultiHeight in mm
1650 mmLength in mm
665 mmWidth in mm
815 mmType
1/14 GN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT 2X GN 1/1 GN 1/18 H. 165CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 964,00MOQ
1Itemnr.
72.3738Brand
HupferMaterial
PlasticColour
MultiInterval in mm
150 mmHeight in mm
1650 mmType
1/18 GNLength in mm
665 mmWidth in mm
815 mm -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT 2X GN 1/1 GN 1/20 H. 165CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: acrylic glass door, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum sheet.
Please specify the color of the side walls when ordering.
€ 974,00MOQ
1Itemnr.
72.3739Brand
HupferMaterial
PlasticColour
MultiInterval in mm
125 mmHeight in mm
1650 mmLength in mm
665 mmWidth in mm
815 mmType
1/20GN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT 2X GN 1/1 GN 1/26 H. 165CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 1.011,00MOQ
1Itemnr.
72.3740Brand
HupferMaterial
PlasticColour
MultiInterval in mm
100 mmHeight in mm
1650 mmLength in mm
665 mmWidth in mm
815 mmType
1/26 GN -
TRAYS/CLEARANCE TROLLEY 1-COMPARTMENT 2X GN 1/1 GN 1/36 H. 165CM. HUPFER
Geen merkTray clearing trolley made of anodised aluminum tube profile with side walls of 3.2 mm. thick, plastic-coated plate. The tube construction consists of a special profile in which the side walls are mounted; stainless steel tray guides. Mobile by means of 4 swivel castors diam. 125mm., of which 2 braked in galvanized forks. Buffer rings on the corners of the clearing trolley. The tray clearing trolley is fitted with a push-through block as standard. Only The side walls can be supplied in different colours: light grey, light oak and maple (maple). RAL colors are available on request at an additional cost. The clearing trolley can be supplied at an additional cost with: door made of acrylic glass, ribbed wire basket for placement on top of the clearing trolley, push handle, top with roof rack, rear wall, bottom or roof (color as side wall) and side walls of perforated aluminum plate.
Please specify the color of the side walls when ordering.
€ 1.089,00MOQ
1Itemnr.
72.3741Brand
HupferMaterial
PlasticColour
MultiInterval in mm
75 mmHeight in mm
1650 mmLength in mm
665 mmWidth in mm
815 mmType
1/36 GN